Flooring & Decks

Recoating Fiberglass Composite Deck.

SUGGESTION: Begin by pressure washing the deck. After the deck is dry, apply 2 coats of Andek NW 'Z' Grade. NW 'Z' Grade is designed for permanent flexibility and toughness, abrasion resistance, and to bridge and move with hairline cracks, and to resist impingement attack. For increased traction, add SoftSand aggregate.
NW 'Z' Grade Data Sheet (pdf)
SoftSand



Recoat and improve traction on Concrete Decks and Balconies.

SUGGESTION: Begin by cleaning and pressure washing the roof. Allow to dry. As a basecoat, apply Andek AIM#1. AIM#1 creates a very tough, high performance barrier. Afterwards, apply 2 coats of Andek Wearcoat 66 with SoftSand aggregrate. The Wearcoat 66 is a tough, hard-wearing and chemically resistant coating. Wearcoat 66 is available in a wide variety of colors.
AIM #1 Data Sheet (pdf)
Wearcoat 66 Data Sheet (pdf)
SoftSand



Recoat and improve traction on concrete Loading Docks and Ramps.

SOLUTION: First powerwash and allow concrete surface to dry. Use Andek Polafloor Epoxy Topping to patch, level or repair and replace broken edges on concrete surface. It is fast setting and extremely durable. Afterwards, apply 2 coats of Andek Wearcoat 66. Wearcoat 66 prevents hot tires from sticking to painted surfaces. For added traction, SoftSand may be added.
Polafloor Epoxy Topping Data Sheet (pdf)
Wearcoat 66 Data Sheet (pdf)
SoftSand



Seal and protect Wood Decks and Wood Balconies.

SOLUTION: First clean, powerwash and allow wood to dry. Then coat wood with Andek Polaseal EFM. Polaseal EFM is a water repellent treatment specifically designed to protect exterior wood surfaces. Polaseal EFM contains a proven fire retardant to reduce flame spread in the event of a fire, and a blend of special preservatives to fight against decay.
Polaseal EFM Data Sheet (pdf)



Seal and protect Concrete Garage Floors.

SOLUTION: Begin by cleaning and pressure washing garage floor. Afterwards, apply 2 coats of Andek Wearcoat 66. Wearcoat 66 prevents hot tires from sticking to painted surface. For added traction SoftSand may be added. Where a clear coat finish is desired, use Clearcoat 66.
Wearcoat 66 Data Sheet (pdf)
SoftSand
Clearcoat 66 Data Sheet (pdf)



Seal and protect Horse Stable Floors.

SOLUTION: Begin by cleaning and pressure washing Stable Floor. Next, apply 2 coats ofAndek Wearcoat 66 with SoftSand Rubber Granules. The SoftSand in Wearcoat 66 provides a surface that is comfortable for horse hooves and easy to clean. In addition, it provides traction for stability and can be washed and hosed out quickly.
Wearcoat 66 Data Sheet (pdf)
SoftSand



Boat Docks

SOLUTION: Begin by cleaning and pressure washing Dock. Next, apply 2 coats of Andek NW 'Z' Grade with SoftSand Rubber Granules. NW 'Z' Grade is an ideal coating for marine conditions, and the SoftSand provides excellent traction, especially when the surface is wet.
NW 'Z' Grade Data Sheet (pdf)
SoftSand